The electric butterfly valve produced by the electric butterfly valve manufacturer is a common type of valve, and it is also a control component in the hydraulic transmission system. It has the function of cutting off and regulating the fluid flow of the piping system. It can be used not only in municipal water conservancy projects, but also in the oil, gas and water treatment industries. However, as a control component on the pipeline, the electric butterfly valve produced by the electric butterfly valve manufacturer also requires regular maintenance. Next, durable electric butterfly valve manufacturers will introduce the maintenance of electric butterfly valves.

1. Keep all parts well lubricated

Since the electric butterfly valve needs to be fully opened and fully closed periodically during the working process, if the parts of the electric butterfly valve are not opened and closed smoothly due to corrosion, it cannot be used normally. Therefore, after the electric butterfly valve of the electric butterfly valve manufacturer is installed and used in the pipeline system, all parts need to be lubricated during maintenance to avoid all parts rusting and dying.

2. Clean the impurities on the inner wall of the valve body

If there are many impurities on the inner wall of the Jiuding intelligent electric butterfly valve, the electric butterfly valve will not be closed tightly when it is closed. Therefore, when repairing the electric butterfly valve produced by the electric butterfly valve manufacturer, the electric butterfly valve should be fully opened, and the impurities on the inner wall of the valve body should be washed away by the pressure of the fluid in the pipeline. After removing the impurities on the inner wall, the valve should be closed again.

3. Filter impurities in the pipeline

When the electric butterfly valve is repaired, the impurities in the pipeline should also be filtered, because the impurities in the pipeline will easily squeeze the sealing surface of the electric butterfly valve when the electric butterfly valve is closed, causing the valve to fail to close completely and leak. Therefore, in order to avoid potential safety hazards, electric butterfly valve manufacturers hope to filter impurities in the pipeline when maintaining electric butterfly valves.

Hope the electric butterfly valve can work normally, the electric butterfly valve manufacturer hopes that you can carry out regular maintenance, including lubricating all parts, cleaning the impurities on the inner wall of the valve body and the impurities in the pipeline, so that the electric butterfly valve will not be damaged by unfavorable factors during use .