The inside of the filter shell is mainly composed of coarse filter screen, fine filter screen, suction pipe, stainless steel brush or stainless steel suction nozzle, sealing ring, anti-corrosion coating, rotating shaft, etc.
Features:
1. Efficient and accurate filtration: The special structure of the filter disc filtration technology has accurate and sensitive performance, ensuring that only particles with a particle size smaller than the required size can enter the system, which is the most effective filtration system; the specifications are 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ, etc., users can choose different precision filter discs according to water requirements. System flow can be flexibly adjusted according to needs.
2. Standard modularization, saving space: the system is based on standard disc filter unit, according to the modular design, users can choose according to their needs, flexible and changeable, and strong interchangeability. The system is compact and occupies a very small area, and can be installed flexibly by using the corner space. For example, the equipment with a water treatment capacity of about 300m3/h occupies only about 6m2 (general water quality, filtration grade 100μ).
3. Fully automatic operation, continuous water effluent: Between each unit in the Boyuan Jinkai filter combination, the backwashing process is carried out alternately, and the working and backwashing states are automatically switched to ensure continuous water output; the backwashing water consumption is extremely high. It only accounts for 0.5% of the water output; if combined with air-assisted backwashing, the self-consumption can be reduced to less than 0.2%. High-speed and thorough backwashing takes only tens of seconds to complete.
4. Long service life: The new plastic filter element is firm, non-abrasive, non-corrosive, and has very little scaling. After years of industrial practical verification, there is no wear and tear after 6-10 years of use, no aging, and the filtering and backwashing effects will not be affected by use. deteriorated over time.
5. High quality and less maintenance: the products meet the corresponding quality standards, all products are tested and tested under simulated working conditions before leaving the factory, no special tools are required, and there are few parts; easy to use, only need regular inspection, almost no Routine maintenance is required.